AQUAEL Flow Heater 2.0 features a Smart Heating System (SHS) – an intelligent power adjustment technology.
The microprocessor adjusts the heating power to maintain the desired temperature in the aquarium, which translates into a smooth heater operation – without temperature surges in the aquarium and without stressing its inhabitants.
With the electronic thermostat, the LED display shows the programmed and current water temperature.
Electronic temperature sensors protect the aquarium from overheating and automatically switch off the device in no-flow conditions. As the device is located on the outlet hose of the external filter, heated water is evenly distributed in the tank. The heater is mounted outside the aquarium, so it does not take up space inside the tank and gives more freedom in interior arrangement.
- Built-in thermal switch – automatic shutdown of the heater in the event of water flow stoppage (filter or pump failure)
- Made of resistant, high-quality materials – European safety standards
- 5 temperature sensors
- Every heater is tested and calibrated in the Aquael laboratory
- Serrated inlet and outlet with additional securing clamps – safe and secure hose connection
Smart Heating System – you no longer need to think about what heater will suit your aquarium – the heater will choose the optimal power on its own!
One Touch System – convenient setting of temperature using just one button
- Clear indication of programmed temperature
- Does not take space in the aquarium
- Indication of current temperature in the tank
Precise electronic thermostat (+/–0.5°C) with a wide range of temperature settings (20-33 °C) – perfect thermal conditions for your aquarium
Even distribution of heated water throughout the aquarium
- Suitable for use on hoses with a diameter of 16 / 22 mm or 19 / 25 mm
The Smart Heating System (SHS)
Technology of intelligent power selection. It consists in adjusting the water heating power to different aquarium sizes and conditions, allowing for the smooth operation of the heater - without temperature jumps in the aquarium and exposing its inhabitants to stress. Thanks to this, the device also consumes only as much energy as is necessary to heat the tank properly.
Safety and convenience
The Flow Heater heater has electronic temperature sensors to protect the tank from overheating. When they detect the cessation of water flow - they automatically turn off the device. The heaters are manufactured to stringent European safety standards, ensuring safe operation and maintenance. Each device is tested and calibrated in the Aquael laboratory. A very convenient solution is the LED display showing the water temperature programmed by the aquarist and the current temperature in the tank. The Flow Heater operates with an accuracy of ±0.5°C in the range of 20°C to 33°C. Thanks to the One Touch system, it is easy to use, allowing you to change the operating temperature with one button.
Freedom of arrangement
Flow Heater is mounted outside the aquarium, which does not take up space inside and gives more freedom of arrangement. The location of the heater on the outlet hose of the external filter also allows for the even distribution of heated water throughout the tank.
The heater is available in 2 models, 300 and 500 W, for different tank sizes. It can be used on hoses with a diameter of 16/22 mm or 19/25. Perfect for both freshwater and marine aquariums.